Product Name	Creeper Connector For Fixing Jack Truss To Hip Truss
Material	galvanized steel
Color	Silver
Standard	ISO
Grade	SUS201, SUS304, SUS316, A2-70, A2-80, A4-80, 4.8 6.8 8.8 10.9 12.9
Used	construction, industry, structural

APPLICATION:

CreeperConnectors are available in two forms, CC200

for 0 to 12.5° pitch chords, which is suitable for both left

and right hand configurations, and CC200L and CC200R

for 15 to 25° pitch chords, which are left and right hand

configurations respectively.

USES

• CreeperConnectors have

been designed to connect

jack trusses to hip trusses.

ADVANTAGES

• CreeperConnectors are

metal plates pre-punched to

accommodate nails and bent

to suit roof pitches up to 25°.

• CreeperConnectors may also

be used to connect half trusses

or cut-off trusses to boomerang

girder trusses.

Creeper Connectors can be used to fix both single and double

mitred jack/cut-off trusses to hip/boomerang girder trusses.

Always fix the shorter leg of a CreeperConnector to the

hip/boomerang chord and the longer leg to the jack/cut-off chord.

CreeperConnectors are to be fixed using 30 x 2.8mm

MiTek galvanized reinforced head nails as specified for each

type of fixing, in addition to 3/75mm flathead nails fixed directly

through the chords.

NOTES:

1. A Type A Connection has a CreeperConnector fastened to

the truss top chords and 3/75mm nails through the truss

bottom chords as shown below.

2. A Type B Connection has CreeperConnectors fastened to both

truss top and bottom chords as shown below.

3. Beneath each CreeperConnector are 3/75mm framing nails

not shown in drawings for clarity.

Inquiry Cart 0